6.6. Photographer with CameraThe photographer's SLR was likely one of the tiniest details I'd ever made. |
||
|
||
I started with the lens, which was a bit of super-thin shrink wrap tubing stuck on the end of a piece of brass wire. |
||
After trimming down the brass wire, I inserted it into a hole drilled in a length of strip styrene. |
||
Next, I trimmed down the camera body, and bonded a piece of fine copper wire to the end. |
||
After trimming the camera body to size, I wrapped the wire camera strap around and bonded it to the other side. |
||
Finally, I cut off the excess camera strap, and painted the camera black. The last step was to hang it around the neck of a Preiser figure. |
||
ReturnCopyright © 2017-2020 by David K. Smith. All Rights Reserved | Site Map |